Workshop safety

Welcome to THE WORKSHOP

Here you will learn about the tools that we have available to use in the Design Lab through our online badging platform, Elevate. You will then take the safety training tests and demonstrate your knowledge in the challenge listed below.

SAFETY CHALLENGES

Workshop Safety

Design Lab Safety Training

Learn about common safety hazards (through the slide deck to the right)
Understand the safety rules
Know why the safety rules exist
Complete all 'Design Safety for MS' quizzes with a 100% score.
- https://elevate.unishanoi.org/elevate_app (login with Google!)

Smiley face challenge

Create your own personalized smiley face using the below tools for one final safety check. Help each other out. Apply what you have learned during the safety course. Ask questions if unsure

Use a tape-ring to draw a circle on an offcut of wood that is at least 125mm x 125mm. Then draw a smiley face of your choosing.
Use the Pillar Drill or Cordless Drill to make starter holes for the eyes and mouth. If any of the cut-outs ( e.g. the mouth) have a sharp corner, drill your starter hole in that or those corners.
Use the Scroll Saw to cut out the eyes and mouth. Feel free to practice using the scroll saw on an offcut (scrap piece of plywood).
Use the Band Saw to cut off most of the plywood around your smiley.
Use the Belt Sander to sand down the sides into a circular shape.
Use the Sanding Block and course and fine Sandpaper (different grits) to refine the edges into a bevel.

Magic Wallet

Create a magic wallet! (and learn how to use an exacto knive, safety ruler, cutting mat and hot glue gun)

Follow this instructable: https://www.instructables.com/Magic-Cardboard-Wallet-Super-Easy/

Foam Core basics challenge

As a class, watch FoamCore Basics Tutorial Guide
Gather your materials (foam core, hot glue, white glue, art knife, cutting board, ruler, tape) and get to your assigned workspace
Safely cut out 6 even sides of foam core that measure 50mm x 50mm
Trim each side to 45 degrees
use tape to hold each piece in place while you apply a drop of hot glue and assemble your box
set aside your box to dry and clean up your area